MAGNITIZED FLEXIBLE CERAMIC HEATING PADS
All of our heating pads can be purchased through our Canadian head office for shipment to the USA and Canada.
Magnetic – Flexibe Ceramic Heating Pads
Mangnetic heating elements can be used for post weld heat treatment.
Usually of large, welded constructions, including steam drums and vessels
or for use in Furnances.
Practical solutions to hold Heaters in proper positions.
Magnetic Ceramic pad heater with high temperature blanket & stainlessw steel backing.
Magnetic elements can also be supplied utilizing 60 V or 80 V supplies which can be powered and controlled via standard 60 v and 80 V output, 50 kVA or 70 kVA heat treatment machines.
12″ X 9.75″
15″ X 8″
18″ X 6.5″
FOUR BANK – FLEXIBLE CERAMIC HEATERS
Four Bank – Flexibe Ceramic Heating Pads
Four Bank heating elements can be used for post weld heat treatment.
Usually of large, wleded constructions, including steam drums and vessels or for use in Furnances.
They are practical solutions versus applying several heaters at once.
Rugged construction, stainless steel channel.
Contains 9 s.w.g ICA 135 element coil.
Element Wire Ni Cr 60 / 16 or 80 /20 as core material.
Channel elements can also be supplied utilizing 60 V or 80 V supplies
APPLICATIONS: FOUR BANK – FLEXIBLE CERAMIC HEATERS
PRODUCT CODES: FOUR BANK – FLEXIBLE CERAMIC HEATERS
FINGER – FLEXIBLE CERAMIC HEATING PADS
Finger Flexibe Ceramic Heating Pads
Finger elements can be used for pre and post weld heat treatment.
They are robust and require minimal maintenance.
The element is made with NiCr wire threaded through ring beads. The tails are beaded with regular tail beads and a connector block is attached to the ends to make the connection with the power source cables.
Each finger of the element is rated at 120 amps, 1.3 volts.
The standard 60 volt, 2.7kW finger element is made from 46 fingers, each finger holding 5 beads.
If an alternative voltage finger element is required, the required size can be calculated from the following equation.
BRAIDED ROPE HEATERS
Rope Heaters – Ceramic Heating Pads
Rope elements can be used for pre heating. Industries :heat treatment.
Nuclear industry, construction industry.
Voltage 30, 60 and 80 Volts. Very Robust an easliy wrapperd around pipes.
Manufactured with with ball and socket beads whic are threded by NiCr wire